Butyl Mastic Sealant Tape — Non-hardening, permanent sealHS 39199090Illustrative render
Sealants, Tapes & Adhesives

Butyl Mastic Sealant Tape

Non-hardening, permanent seal

Self-adhesive, non-hardening butyl rubber tape used as a gap-filling sealant under aluminum cladding overlaps for a permanent airtight/watertight seal.

Also known as: butyl tape, mastic sealant tape, butyl rubber sealing strip, cladding sealing tape

Service temperature-30°C to +90°C
Width Options12mm / 19mm / 25mm / 50mm
HS code39199090
Service temperature−30 °C → 90 °C
  • Non-hardening — stays flexible and tacky for life
  • Excellent gap-filling for uneven cladding overlaps
  • Permanent watertight and airtight seal, no curing needed

Technical data

TypeNon-hardening self-adhesive butyl rubber mastic tape
Width Options12mm / 19mm / 25mm / 50mm
Thickness1.5 mm / 2 mm / 3 mm
Roll Length10 m / 15 m
Temperature Range-30°C to +90°C (continuous)
Water ResistanceFully waterproof, permanent seal
StandardsASTM D1970 (butyl adhesive reference)
PackingBoxed rolls

Applications

Sealing under cladding overlapsgasket/gap-filling seal for outdoor jacketing

Standards

ASTM D1970

Manufacturer test certificates and data sheets can be supplied with the order on request.

Customs

39199090Self-adhesive plates/tape of plastics, other (butyl-based)HS heading 3919.90. The code shown is the one used on our export invoices; confirm final classification with your customs broker.

Export packing

Boxed rolls. Loads are palletized or cartoned for ocean freight and can be consolidated with other products in one container.

Questions buyers ask

What is butyl mastic sealant tape used for?

Butyl mastic sealant tape is a self-adhesive, non-hardening butyl rubber tape placed under aluminum cladding overlaps to create a permanent airtight and watertight seal. It fills gaps in uneven laps on outdoor jacketing and acts as a gasket between cladding sheets.

What temperature can butyl mastic tape withstand?

Butyl mastic sealant tape is rated for continuous use from -30°C to +90°C. Because it sits between cladding sheets, on the outer face of the insulation, this range suits most outdoor jacketing. Keep it away from direct contact with hot pipe surfaces.

Does butyl mastic tape harden over time?

No, butyl mastic sealant tape is non-hardening and stays flexible and tacky for life. It needs no curing, so the seal is effective as soon as the cladding lap is closed, and it continues to follow thermal movement of the cladding.

What sizes of butyl mastic tape are available?

Butyl mastic sealant tape is available in 12 mm, 19 mm, 25 mm and 50 mm widths, in 1.5 mm, 2 mm and 3 mm thicknesses, and in 10 m or 15 m rolls. Thicker tape fills larger gaps in uneven overlaps; wider tape suits broader laps on vessels and ducts.

How is butyl mastic tape applied under aluminum cladding?

Butyl mastic sealant tape is pressed onto a clean, dry cladding edge, then the overlapping sheet is closed over it and fixed with Self-Tapping Screw or Insulation Band & Buckles. The compression spreads the mastic into the gap, sealing the lap against water and air.

Butyl mastic tape or silicone sealant: which should I use?

Butyl Mastic Sealant Tape is used inside cladding overlaps, where it stays soft and needs no curing, while Silicone Sealant is gunned onto exposed joints, penetrations and flashings and cures to a flexible rubber. On outdoor cladding the two are often used together.

Is butyl mastic tape waterproof?

Yes, butyl mastic sealant tape is fully waterproof and forms a permanent seal. Keeping water out of cladding laps is important because wet insulation loses thermal performance and can contribute to corrosion under insulation, especially on outdoor lines and vessels.

What HS code is used for butyl mastic sealant tape?

Butyl mastic sealant tape is declared under HS code 39199090, for other self-adhesive plates and tape of plastics, butyl-based in this case. For technical reference, the tape is referenced to ASTM D1970 as a butyl adhesive standard.

Can butyl mastic tape ship together with aluminum cladding?

Yes, butyl mastic sealant tape is packed as boxed rolls and can go in the same container as Aluminum Cladding Sheet & Coil, screws, bands and insulation. Shipments leave from Nhava Sheva (JNPT) or Mumbai, FCL or LCL. In your enquiry, give the width, thickness, roll length and number of rolls.

Export markets

We ship Butyl Mastic Sealant Tape to buyers worldwide. Country pages cover ports, standards and documents:

Need Butyl Mastic Sealant Tape shipped?

Tell us the size, thickness, grade and quantity with your destination port. We reply with a priced export offer, packing details and documents.